Lincoln Electric INVERTEC V200-T Bedienungsanleitung PDF herunterladen (Seite 22)

E-2

TROUBLESHOOTING

E-2

INVERTEC V200-T

Observe all Safety Guidelines detailed throughout this manual

If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your

Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.

CAUTION

PROBLEMS

(SYMPTOMS)

POSSIBLE AREAS OF

MISADJUSTMENTS(S)

RECOMMENDED

COURSE OF ACTION

The machine is dead - no output -

no fan.

No output but the fan operates nor-

mally.

Output turns on momentarily, then

switches off.

No output - Main input fuses open,

indicating excessive current draw.

1. The input power switch must be

in the ON position.

2. Make sure the input voltage is

correct for the machine.

3. Check continuity of the 0.5-amp

slow blow fuse located on the

P.C. Board.

1. The machine may be overheated.

Check the thermal indicator light.

Wait for the machine to cool and

the thermostats to reset.

1. Check the input voltage. Make

sure the input voltage is correct

for the machine.

1. Inspect input leads for possible

shorts or grounds or mis-connec-

tions.

2. Install new fuses and reapply

power. If fuses open again, con-

sult a Lincoln Authorized Field

Service Facility.

If all recommended possible areas of

misadjustment have been checked

and the problem persists, Contact

your local Lincoln Authorized Field

Service Facility.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Lincoln Electric INVERTEC V200-T Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schweißsystem Lincoln Electric INVERTEC V200-T